SYSTEMS

Contact us to request information

NATURAL VENTILATION

We realize natural ventilation systems for fattening and gestation departments in gestation.
Thanks to this system is obtained in a natural circulation of air that enters from the side windows (louvre or tilt windows) and comes out from the opening in the highest ridge. This ventilation is more active the greater is the difference in temperature between inside and outside and the difference in higher is the difference between the air inlet and outlet openings height.
It is evident that it will be relatively easier to obtain a good ventilation in the winter rather than in the summer, when the shelter cover has a slope sufficient to ensure a significant difference in height between the air inlet and outlet openings. The design of the shed in natural ventilation must carefully consider some precautions such as:
• the realization of closing systems for windows and the ridge inlet, easily adjustable with mechanized opening and controlled by an automatic control unit;
• the construction of the roof with the due slope.
Recent experiences have shown interesting results obtainable with natural ventilation, thanks to the scrupulous observance of all the measures indicated.
In particular, it has clearly been demonstrated that natural ventilation, if well done and correctly managed, is able to ensure the maintenance of excellent environmental conditions inside the hospital, with considerable independence from external conditions.

MECHANICAL VENTILATION

Thanks to our long experience, we are specialized in the design and construction of ventilation systems in every type of environment and situation. After producing complete farms in climatic zones ranging from -50 ° C winter to + 45 ° C summer, we are sure to be able to respond to every need of the customer.
In mechanical ventilation, the air exchange is obtained by means of specially designed fans and adequate air inlets, right positioned in the most suitable areas. The advantage consists in the possibility of adjusting, in a precise and automatic way, the air replacement flow rates regardless of the external climatic conditions.
It is therefore possible to implement the ventilation in relation to the specific needs of the animals housed in the various departments. The convenience to adopt this system is given by the greater productivity of the animals in relation to the best environmental conditions obtainable in admissions.
The correct distribution in the environment depends on the arrangement of the air inlets and on the air input speed; for this it is necessary that these openings could be adjusted to adapt them to the necessary changes in flow in the shelter.
This is normally entrusted in any case to the control of a control unit equipped with a temperature-sensitive probe, which provides to increase and decrease the fan speed according to the desired environmental temperature and the weight of the animals present.
In the control unit it is also possible to set the minimum fan speed in order to ensure the minimum irrepressible ventilation.
The control units, fans, actuators, sensors and other components we install are produced by FANCOM, the world leader in ventilation systems for livestock. For years we are official dealers and service assistance experts in Italy and around the world.

PAD COOLING SYSTEM

The Pad-Cooling system is an efficient air cooling and humidification system used in the departments where highly efficient cooling is required, such as the delivery, gestation and boar sectors.
Thanks to a pumping station and through a pipe, water is circulated which, starting from a collection tank, is sent in an upper channel inside which, flowing, it is distributed and through the special holes it falls down. inside the evaporative panels, wetting them; The air entering the rooms, which are put in depression by means of fans, is obliged to pass through the evaporating panels; some of the water evaporates due to hot, dry air passing through the PAD. The rest of the water is discharged into the pumping station via a lower water collection channel.
The heat required for evaporation is taken from the air itself. The air, after passing through the PAD, is then cooled and humidified simultaneously without any external energy source for the evaporation process: a completely natural cooling process.
The PAD-COOLING system is naturally automated and managed by the microclimate control unit which, depending on the parameters to be obtained, regulates the functioning of the system.
This type of system is used in very hot and humid climatic zones, where the cooling with nozzles (cheaper) fails to obtain a sufficient yield.

HEATED NESTS

For piglets and weaners is recommended create areas of heated floor (to water or electrically) to create the optimal zones of comfort for the animals and at the same time minimize the energy consumption of farm.
The proposed solutions are varied and include:
Water plates made ​​of plastic COATED steel for maximum comfort;
Plates with water in POLYMER concrete with or without stainless steel sheet coating;
Plates with electrical resistance in POLYMER concrete with or without stainless steel sheet coating;
In addition to that we offer the infrared lamps to sustain the heating of piglets in the nest or covers for the nest areas.

View the Technical Sheet

WATER HEATING

We realize heating systems with radiant systems using winged pipes working with hot water. To realize this type of heating system, aluminum tubes with a high caloric output (about 150 Kcal / linear meter) have been designed: the DELTA pipes.
These tubes are treated by means of the corrosion protection with an anodizing process and are easy to install and guarantee a long service life. The passage of the heated water to the desired temperature ensures a uniform and controlled distribution. A winged tube heating system guarantees a greater uniformity of heat and a lower air speed (and consequently a greater welfare of the animals) inside the premises compared to the use of systems with air heaters.

LIQUID FEEDING

We realize feeding preparation kitchens and liquid distribution systems.
The liquid feeding system has many advantages. It is familiar that one can create personalized diets to the animals or add afterwards different ingredients, according to the specific exigencies. The dosing computer allows an ingredient selection also differentiated in the daytime, and different also according to the animal ages.
The liquid feeding system is moreover completely automated, it requires a minimal labour, and ensure a quick distribution of the food in the right portions. The systems we offer are easy to use, the charts representing the alimentation curves are easy to interpret, and the system can be controlled directly from a personal computer. The liquid feeding systems are today at forefront and represent an important investment. Our company can supply the absolute certainty, and assure the functionality of the systems from a competitive price and with a specialized assistance.
The system, compound with a dosing system, with the kitchen, and the peripherals (as valves, pipes for the distribution) is designed and advised trying to obtain the best result in terms of practicality and quality.
Each strategy you are going to follow with our system, the right portion of feeding is always guaranteed.

DRY FEEDING

We size, supply and install dry feeding systems of different types:
– Dosed individual feeding;
– Power at will;
Feed transport and distribution systems can be chain or spiral.
The individual feeding systems can be controlled manually and therefore each dispenser must be constantly adjusted by the operator or an automatic metering device such as FAROTEK can be installed.
FAROTEK can be applied in the gestation departments with single cates or in farrowing rooms; the sow, by moving a sensor in the feeder, activates the measuring device that discharges 60 grams of feed at a time, up to the limit set in the curve. The advantages compared to the traditional dispensers with manual management are many such as:
– Single dosing, animal for animal based on a feeding curve inserted in the central control system that daily regulates the feed dosage based on the curve position;
– Better feed intake and less weight loss;
– Increased milk production;
– More uniform piglets size.

WATER SUPPLY

We make drinking systems for pigs in all departments that, depending on the case, can be completely in stainless steel or with PVC or polyethylene wall lines; the down pipe are completely made of stainless steel (single or double) and drinking troughs with or without a bowl.
According to specific needs, we can integrate automatic dosing systems with medicinal treatments in line to treat the departments that need it individually.

ELECTRICAL SYSTEM

We make electrical systems for all farm departments using materials and methods of installation suitable with the environments for which they are intended.
In an aggressive environment, with a high presence of mice and water nothing should be left to chance and therefore the electrical system is realized by implementing measures necessary for a lasting system over time.
The electrical system is also the link between them of all the plants that make up a breeding, such as heating, ventilation, lighting, feeding systems, etc. so it is essential that it be implemented properly.

CENTRALISED CONTROL

In modern farms everything must be under the control of the breeder, but to do so he must have the means.
For this purpose we install centralized control systems connectable to our realizations based on FANCOM components and logics that allow a complete interconnection of the systems between them (power supply, ventilation, lights, heating, etc.) and a single management grouped and easily controlled by an operator. The centralized control system can be connected and managed remotely via a tablet or smartphone.

STOREAGE BINS

We supply various types of Silos, both in galvanized steel and in fiberglass (monolithic or dismountable).

Go back to Pig Farming